‼️주의사항
아직은 나노바나나가 수학적으로 정확히 그려내는게 아니기때문에, 그리드에 맞지 않을 수 있으니 잘 확인해보시길 바랍니다.
🔻프롬프트
Recreate the attached logo as a minimalist construction diagram
in the style of a vintage brand identity manual.
CRITICAL ACCURACY RULES (must follow):
- The logo's silhouette must be preserved exactly. Do not redraw,
smooth, or reinterpret any part of its shape.
- Every guideline must have a REASON — it must touch, align with,
or pass through a real feature of the logo (an edge, a corner,
a curve tangent, a key transition point).
- If a line doesn't align with something specific in the logo,
DO NOT draw it. Sparse and correct beats dense and decorative.
- Every circle must align tangentially with a curved section of
the logo. No floating circles in empty space.
VISUAL ELEMENTS:
1. LOGO
- Fill the logo's interior with medium gray (#8A8A8A), flat,
no effects.
- Draw the logo's outer contour as a thin black solid line,
identical in style to the guidelines.
(The logo should appear as "a gray-filled shape with a
black outline.")
- The outline weight must be exactly the same as the
guidelines and the bounding frame.
- Preserve the original shape and proportions exactly.
- Ignore small text or taglines.
2. BOUNDING FRAME
- Draw a thin black rectangle that tightly contains the logo.
- The frame's edges must touch the logo's extreme points
(topmost, bottommost, leftmost, rightmost).
- Add a small consistent margin on all four sides, equal on
all sides (roughly 5-10% of logo height).
3. INTERNAL GUIDELINES (draw only what's necessary)
- Add horizontal lines ONLY where the logo has major horizontal
features (top of a stroke, bottom of a stroke, baseline,
key alignment points).
- Add vertical lines ONLY where the logo has major vertical
features (left/right edge of a stroke, a curve's tangent
point, a corner).
- Typical count: 2-5 horizontal, 2-5 vertical. Do not exceed
this unless the logo genuinely has that many features.
- All lines are thin black solid lines, extending fully
across the frame.
4. CONSTRUCTION CIRCLES (only if the logo has clear circular curves)
- Draw 1-3 thin black outline circles (no fill).
- Each circle must tangentially match a curved section of the
logo — the circle's arc must overlap the logo's curve where
they coincide.
- If the logo is purely geometric with no obvious circles,
OMIT circles entirely.
5. LINE WEIGHT CONSISTENCY (very important)
- The logo's outline, the bounding frame, the internal
guidelines, and the construction circles — ALL of these
lines must be exactly the same thin black solid weight.
- No line should be thicker or thinner than another.
6. BACKGROUND
- Warm off-white paper (#EEECE6) with subtle grain texture.
SELF-CHECK BEFORE OUTPUTTING:
- Does every line touch or explain a real feature of the logo?
- Do the circles actually align with the logo's curves, or are
they floating arbitrarily?
- Is the bounding frame snug against the logo's extreme points?
- Is the logo silhouette identical to the input?
- Is the logo's outline the same weight as the other guidelines?
If any answer is "no", fix it before outputting.
STYLE:
- Flat 2D, no shadows, no 3D, no color.
- Vintage Paul Rand / Vignelli brand manual aesthetic.
- Generous whitespace, clean composition.
🔻사용예시..
아래 이미지들도 자세히보면 그리드에 맞지 않는 부분이 확인됩니다. 현재 나노바나나2의 한계입니다.
‼️주의사항
아직은 나노바나나가 수학적으로 정확히 그려내는게 아니기때문에, 그리드에 맞지 않을 수 있으니 잘 확인해보시길 바랍니다.
🔻프롬프트
Recreate the attached logo as a minimalist construction diagram
in the style of a vintage brand identity manual.
CRITICAL ACCURACY RULES (must follow):
- The logo's silhouette must be preserved exactly. Do not redraw,
smooth, or reinterpret any part of its shape.
- Every guideline must have a REASON — it must touch, align with,
or pass through a real feature of the logo (an edge, a corner,
a curve tangent, a key transition point).
- If a line doesn't align with something specific in the logo,
DO NOT draw it. Sparse and correct beats dense and decorative.
- Every circle must align tangentially with a curved section of
the logo. No floating circles in empty space.
VISUAL ELEMENTS:
1. LOGO
- Fill the logo's interior with medium gray (#8A8A8A), flat,
no effects.
- Draw the logo's outer contour as a thin black solid line,
identical in style to the guidelines.
(The logo should appear as "a gray-filled shape with a
black outline.")
- The outline weight must be exactly the same as the
guidelines and the bounding frame.
- Preserve the original shape and proportions exactly.
- Ignore small text or taglines.
2. BOUNDING FRAME
- Draw a thin black rectangle that tightly contains the logo.
- The frame's edges must touch the logo's extreme points
(topmost, bottommost, leftmost, rightmost).
- Add a small consistent margin on all four sides, equal on
all sides (roughly 5-10% of logo height).
3. INTERNAL GUIDELINES (draw only what's necessary)
- Add horizontal lines ONLY where the logo has major horizontal
features (top of a stroke, bottom of a stroke, baseline,
key alignment points).
- Add vertical lines ONLY where the logo has major vertical
features (left/right edge of a stroke, a curve's tangent
point, a corner).
- Typical count: 2-5 horizontal, 2-5 vertical. Do not exceed
this unless the logo genuinely has that many features.
- All lines are thin black solid lines, extending fully
across the frame.
4. CONSTRUCTION CIRCLES (only if the logo has clear circular curves)
- Draw 1-3 thin black outline circles (no fill).
- Each circle must tangentially match a curved section of the
logo — the circle's arc must overlap the logo's curve where
they coincide.
- If the logo is purely geometric with no obvious circles,
OMIT circles entirely.
5. LINE WEIGHT CONSISTENCY (very important)
- The logo's outline, the bounding frame, the internal
guidelines, and the construction circles — ALL of these
lines must be exactly the same thin black solid weight.
- No line should be thicker or thinner than another.
6. BACKGROUND
- Warm off-white paper (#EEECE6) with subtle grain texture.
SELF-CHECK BEFORE OUTPUTTING:
- Does every line touch or explain a real feature of the logo?
- Do the circles actually align with the logo's curves, or are
they floating arbitrarily?
- Is the bounding frame snug against the logo's extreme points?
- Is the logo silhouette identical to the input?
- Is the logo's outline the same weight as the other guidelines?
If any answer is "no", fix it before outputting.
STYLE:
- Flat 2D, no shadows, no 3D, no color.
- Vintage Paul Rand / Vignelli brand manual aesthetic.
- Generous whitespace, clean composition.
🔻사용예시..
아래 이미지들도 자세히보면 그리드에 맞지 않는 부분이 확인됩니다. 현재 나노바나나2의 한계입니다.